P. P. Aquatech
P. P. Aquatech
Badarpur, Delhi
GST No. 07AHMPR3193G1ZY
TrustSEAL Verified
Call 0804603739888% Response Rate
SEND EMAIL

AIR BLOWER

We are a big manufacturer ans supplier of dust collector bag in very good quality also in different sizes.PP AQUATECH Roots Blower/Pumps means reliability, availability and maintainability. “PP AQUATECH” is committed to supplying our customers with reliable products manufactured with state of the art technologies. Production and inventory are being scheduled and controlled to ensure these units will be available when you need them. PP AQUATECH blowers are heavy duty rotary blowers designed with vertical and horizontal installation requirements. The compact study design is engineered for continuous service when operated in accordance with speed and pressure ratings. Antifriction bearings are used with roller bearings at the drive shaft to with stand v-belt pull.

A complete range of standard Air blowers is available for ¿¿¿ow rates from 25 m3/hr to 10,000 m3/hr in single stage and parallel con¿¿¿guration for working pressure range up to 1 kg/cm2. They are available as total package units, ready to install or as bare blower units for replacement.

DESIGN AND CONSTRUCTION FEATURES

THE ROOTS MECHANISM(PP AQUATECH MECHANICAL BOOSTER)

The Roots mechanism is a valve less positive displacement device in which a pair of lobed rotors, interlocked and synchronized, rotate in opposite directions moving past each other and the stator wall with small clearance. Gas is trapped in front of each lobe and swept around the stator periphery from inlet to outlet. Very large displacement (above 20000 m3/h) and the mechanism has proven very effective in the pressure region from 10 to 10¯³ mbar, but only when delivering against low pressure differentials.

The fall off in pressure ratio either side of the peak can be attributed to conductance effects and to back-leakage of a proportion of the pumped gases. This latter effect increases with increasing outlet pressure.

As a displacement machine and not a true compressor, the Roots mechanism is not suited to discharging to near atmospheric pressure ( i.e with signi¿¿¿cant differential pressure). The low pressure ratio possible results in a large amount of work being done on the pumped gas, which leads to problems of overheating.

It is possible to obtain operation at higher pressure by providing a pressure relief valve/hydrokinetic drive/Variable frequency drive such that a maximum pressure differential is not exceeded.

HVAC Air Diffuser

HVAC Air Diffuser
  • HVAC Air Diffuser
  • HVAC Air Diffuser
  • HVAC Air Diffuser
Get Best Quote
Approx. Price: Rs 980 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity50 Piece
Typeall type
Usage/Applicationall type
BrandPP aqua
ShapeCircular/Round
Capacity100 per day
Surface FinishPowder Coated
MaterialAluminium
Size300,450 mm,600 mm etc
Colorwhite or as required

We are a manufacturer, Fabricating, suplying and installing of Square type diffuser.

We can be configured using a variety of processes and designed for either batch or continuous operation. HVAC diffuser for field erected circular/ Square designs are available.
Request
Callback
Yes! I am Interested

Twin Lobe Air Roots Blower

Twin Lobe Air Roots Blower
  • Twin Lobe Air Roots Blower
Get Best Quote
Approx. Price: Rs 42,500 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Model Name/NumberPPA42
Typeroot, Twin lobe
Warranty18 month
Usage/ApplicationIndustrial
MaterialCI
Capacityupto 2000 cum
Pressureupto 0.8 kg/Sqcm

We are a manufacturer and supplier of root blower upto 25000 cum per Hour capacity.

PP AQUATECH Roots Blower/Pumps means reliability, availability and maintainability. “PP AQUATECH” is committed to supplying our customers with reliable products manufactured with state of the art technologies. Production and inventory are being scheduled and controlled to ensure these units will be available when you need them. PP AQUATECH blowers are heavy duty rotary blowers designed with vertical and horizontal installation requirements. The compact study design is engineered for continuous service when operated in accordance with speed and pressure ratings. Antifriction bearings are used with roller bearings at the drive shaft to with stand v-belt pull.

 

A complete range of standard Air blowers is available for ???ow rates from 25 m3/hr to 10,000 m3/hr in single stage and parallel con???guration for working pressure range up to 1 kg/cm2. They are available as total package units, ready to install or as bare blower units for replacement.

 

DESIGN AND CONSTRUCTION FEATURES

Improved volumetric e ciency and reduced operating temperature Thrust control splashed oil lubricated spur timing gears Balanced   precision   machined   twin    lobe    impellers Low noise level, less operating power required

    Connections in standard pipe sizes Rigid one-piece cast iron casting Design for gas services


Anti friction bearings

THE ROOTS MECHANISM 

(PP AQUATECH MECHANICAL BOOSTER)

The Roots mechanism is a valve less positive displacement device in which a pair of lobed rotors, interlocked and synchronized, rotate in opposite directions moving past each other and the stator wall with small clearance. Gas is trapped in front of each lobe and swept around the stator periphery from inlet to outlet. Very large displacement (above 20000 m3/h) and the mechanism has proven very effective in the pressure region from 10 to 10¯³ mbar, but only when delivering against low pressure differentials.

The fall off in pressure ratio either side of the peak can be attributed to conductance effects and to back-leakage of a proportion of the pumped gases. This latter effect increases with increasing outlet pressure.

As a displacement machine and not a true compressor, the Roots mechanism is not suited to discharging to near atmospheric pressure ( i.e with signi???cant differential pressure). The low pressure ratio possible results in a large amount of work being done on the pumped gas, which leads to problems of overheating.

It is possible to obtain operation at higher pressure by providing a pressure relief valve/hydrokinetic drive/Variable frequency drive such that a maximum pressure differential is not exceeded.

Request
Callback
Yes! I am Interested

PP Aqua Twin Lobe Blower

PP Aqua Twin Lobe Blower
  • PP Aqua Twin Lobe Blower
Get Best Quote
Approx. Price: Rs 30,000 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity01 Number
TypeTwin Lobe
Usage/ApplicationIndustrial
Warranty18 MONTH
Model Name/NumberPPA42
MaterialCI
PressureUPTO 0.7KG/SQCM
SizeUP TO 25000 CUM PER HOUR
ColorGREY
Motor Powerup to 150 hp
Air Flowupto 20000 cum per hour
I Deal InNew Only

PP AQUATECH Roots Blower/Pumps means reliability, availability and maintainability. “PP AQUATECH” is committed to supplying our customers with reliable products manufactured with state of the art technologies. Production and inventory are being scheduled and controlled to ensure these units will be available when you need them. PP AQUATECH blowers are heavy duty rotary blowers designed with vertical and horizontal installation requirements. The compact study design is engineered for continuous service when operated in accordance with speed and pressure ratings. Antifriction bearings are used with roller bearings at the drive shaft to with stand v-belt pull.

 

A complete range of standard Air blowers is available for ???ow rates from 25 m3/hr to 10,000 m3/hr in single stage and parallel con???guration for working pressure range up to 1 kg/cm2. They are available as total package units, ready to install or as bare blower units for replacement.

 

DESIGN AND CONSTRUCTION FEATURES

Improved volumetric e ciency and reduced operating temperature Thrust control splashed oil lubricated spur timing gears Balanced   precision   machined   twin    lobe    impellers Low noise level, less operating power required

    Connections in standard pipe sizes Rigid one-piece cast iron casting Design for gas services


Anti friction bearings

 

THE ROOTS MECHANISM

(PP AQUATECH MECHANICAL BOOSTER)


 

The Roots mechanism is a valve less positive displacement device in which a pair of lobed rotors, interlocked and synchronized, rotate in opposite directions moving past each other and the stator wall with small clearance. Gas is trapped in front of each lobe and swept around the stator periphery from inlet to outlet. Very large displacement (above 20000 m3/h) and the mechanism has proven very effective in the pressure region from 10 to 10¯³ mbar, but only when delivering against low pressure differentials.

The fall off in pressure ratio either side of the peak can be attributed to conductance effects and to back-leakage of a proportion of the pumped gases. This latter effect increases with increasing outlet pressure.

As a displacement machine and not a true compressor, the Roots mechanism is not suited to discharging to near atmospheric pressure ( i.e with signi???cant differential pressure). The low pressure ratio possible results in a large amount of work being done on the pumped gas, which leads to problems of overheating.

 

Request
Callback


Additional Information:

  • Production Capacity: 05
  • Delivery Time: 10
  • Packaging Details: wodden
Yes! I am Interested

PP Aqua Root Blower

PP Aqua Root Blower
  • PP Aqua Root Blower
Get Best Quote
Approx. Price: Rs 30,000 / PieceGet Latest Price
Product Brochure

Product Details:

Model Name/NumberPPA42
Operating Typetwin lobe
Warranty18 month
Usage/ApplicationIndustrial
Colorgrey
Capacityupto 20000 cum
BrandPP AQUATECH

PP AQUATECH Roots Blower/Pumps means reliability, availability and maintainability. PP AQUATECH is committed to supplying our customers with reliable products manufactured with state of the art technologies. Production and inventory are being scheduled and controlled to ensure these units will be available when you need them. PP AQUATECH blowers are heavy duty rotary blowers designed with vertical and horizontal installation requirements. The compact study design is engineered for continuous service when operated in accordance with speed and pressure ratings. Antifriction bearings are used with roller bearings at the drive shaft to with stand v-belt pull.

 

A complete range of standard Air blowers is available for  ow rates from 25 m3/hr to 10,000 m3/hr in single stage and parallel con guration for working pressure range up to 1 kg/cm2. They are available as total package units, ready to install or as bare blower units for replacement.

 

Request
Callback
Yes! I am Interested

Centrifugal Air Blower

Centrifugal Air Blower
  • Centrifugal Air Blower
  • Centrifugal Air Blower
  • Centrifugal Air Blower
Get Best Quote
Approx. Price: Rs 9,850 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity01 Piece
Type of Centrifugal BlowersDouble Inlet Blowers
BrandPP Aquatech
Usage/ApplicationIndustrial
PressureHigh Pressure
MaterialCast Iron
Motor Ratingup to 25 kw
Fan Speed1000-2000 rpm
Blower TypeRoots Blower, Centrifugal Blower
Power SourceElectric Blower
Colorsilver
Blade MaterialStainless Steel
Electric Current TypeAC
I deal inNew Only

PP Aquatech ring Blowers are designed to comply with the safety requirements. They also provide a wide field of application facilities wherever the use of air as energy supply leads to optimum results.We that we will provide our best service to serve you immediately once you need any help in our products.  Especially when products have any problems we will quickly response your requirements to solve your problems.

 Note: high quality & maintaining safety major.

Request
Callback


Additional Information:

  • Item Code: PPA-BL-500
Yes! I am Interested

Twin Lobe Blower

Twin Lobe Blower
  • Twin Lobe Blower
Get Best Quote
Approx. Price: Rs 29,850 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Number
Operating Type7000 MMWG
TypeTWIN LOBE
Usage/ApplicationIndustrial
Warranty18 MONTH
Model Name/NumberPPA42
MaterialCI
PressureUPTO 0.7KG/SQCM
SizeUP TO 25000 CUM PER HOUR
ColorGREY
Country of OriginMade in India

PP AQUATECH Roots Blower/Pumps means reliability, availability and maintainability. “PP AQUATECH” is committed to supplying our customers with reliable products manufactured with state of the art technologies. Production and inventory are being scheduled and controlled to ensure these units will be available when you need them. PP AQUATECH blowers are heavy duty rotary blowers designed with vertical and horizontal installation requirements. The compact study design is engineered for continuous service when operated in accordance with speed and pressure ratings. Antifriction bearings are used with roller bearings at the drive shaft to with stand v-belt pull.

 

A complete range of standard Air blowers is available for ???ow rates from 25 m3/hr to 10,000 m3/hr in single stage and parallel con???guration for working pressure range up to 1 kg/cm2. They are available as total package units, ready to install or as bare blower units for replacement.

 

DESIGN AND CONSTRUCTION FEATURES

Improved volumetric e ciency and reduced operating temperature Thrust control splashed oil lubricated spur timing gears Balanced   precision   machined   twin    lobe    impellers Low noise level, less operating power required

    Connections in standard pipe sizes Rigid one-piece cast iron casting Design for gas services

Anti friction bearings

THE ROOTS MECHANISM 

(PP AQUATECH MECHANICAL BOOSTER)

The Roots mechanism is a valve less positive displacement device in which a pair of lobed rotors, interlocked and synchronized, rotate in opposite directions moving past each other and the stator wall with small clearance. Gas is trapped in front of each lobe and swept around the stator periphery from inlet to outlet. Very large displacement (above 20000 m3/h) and the mechanism has proven very effective in the pressure region from 10 to 10¯³ mbar, but only when delivering against low pressure differentials.

The fall off in pressure ratio either side of the peak can be attributed to conductance effects and to back-leakage of a proportion of the pumped gases. This latter effect increases with increasing outlet pressure.

As a displacement machine and not a true compressor, the Roots mechanism is not suited to discharging to near atmospheric pressure ( i.e with signi???cant differential pressure). The low pressure ratio possible results in a large amount of work being done on the pumped gas, which leads to problems of overheating.

Request
Callback


Additional Information:

  • Item Code: PPA42
  • Production Capacity: 5
  • Delivery Time: 7 DAYS
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Jai Prakash (Proprietor)
P. P. Aquatech
HR 29-B-1, Near Om Shanti, 60 Feet Road
Badarpur, Delhi - 110044, India


Call Us


Send E-mail